- Weld carbon and stainless pipe in 6G position to ASME Section IX with a 98.6% first-pass X-ray acceptance rate
- Complete an average of 18 pressure vessel welds weekly on projects to 30-inch diameter
- Train 4 apprentices on GTAW root passes and code compliance
Welder Resume Example
Welding resumes are read for processes, positions and certifications — in that order. A welder certified to a specific code in specific positions is a completely different hire from a general fabricator.
Summary
AWS-certified welder with 8 years in structural and pipe work. Certified in 6G position for GTAW and SMAW, with a 98.6% first-pass X-ray acceptance rate across 4 years of pressure vessel work.
Experience
- Fabricated structural steel to AWS D1.1 on commercial builds up to 12 storeys
- Maintained a zero-rework record across 3 consecutive third-party inspection cycles
Skills
Education
Certifications
- AWS Certified Welder — D1.1
- ASME Section IX — 6G GTAW/SMAW
- OSHA 10
Here is how to write your own, and what actually gets you the call in this trade.
Licences, tickets and safety training
Welder qualification is issued against a welding procedure specification under a governing code, and it is specific to process, position, material and thickness. Certifications commonly require continuity of practice to remain valid. List process, position and code together rather than saying "certified welder".
What a foreman looks at first
The first pass answers two practical questions: can you legally do this work, and are you free to start. A foreman with a job beginning next week reads for the licence, the current tickets and the availability, and everything else on the page waits behind those.
What you built, at what scale, safely
Describe the work in the units the trade uses: square footage, linear feet, tonnage, service calls per day, machines run, crew size. Add safety record and callback rate if you have them, because on a job site those are worth as much as speed. If you have run a crew or trained apprentices, say so plainly — that is the difference between a hand and a lead.
How you actually get hired for this
Welding hiring almost always ends in a weld test, and the test is the decision. Employers state the process, position and code up front, and certifications are code and procedure specific rather than general. Fabrication shops, pipeline and structural work assess different things, so the resume should name the code and the material thicknesses you have worked.
Mistakes that cost welder candidates interviews
- Writing "welding" instead of the specific processes, which is what postings search for
- Omitting positions and code certifications, which determine what work you are allowed to do
- Not stating your X-ray or rework rate when you have a good one — it is your strongest proof
Moving up in this trade
Welder to certified welder in additional processes, then lead, welding inspector, or fabrication supervision. Inspection credentials are the usual route off the tools.
Before you send it
Check every certification date is current and every licence number is right, since these are verified and an expired ticket ends an application. Keep the file simple: one column, no graphics, no tables. Our free ATS checker will confirm it parses, which matters because large contractors and staffing agencies screen automatically.
More Examples in This Field
Welder Resume Questions
What should a welder resume include?
Licence class, current tickets with their dates, and the equipment you can operate — all of it above the work history — then jobs described in the units the trade uses, your safety record, and any crew or apprentice responsibility. One page, one column, no graphics.
What certifications do I need on a welder resume?
Which tickets are required depends on the trade, the jurisdiction and the site, and the posting sets it out. Whatever you hold matters more than anything else on the page, so list every one with its issue and expiry date — these are verified, and an expired certification ends an application regardless of the work history behind it.
How is hiring for welder roles different?
Hiring in the trades is fast and often informal — a call, a short conversation, sometimes a day on site to see how you work. Referral and reputation count for more than in most fields, so how you leave one job affects the next one.
What do hiring managers look at first on a welder resume?
Your licence class, your current tickets, and when you can start. A foreman with a job beginning next week reads for whether you are legally able to do the work and free to do it, and the rest of the page waits behind those two answers.
Where does a welder career usually go next?
The usual route runs from apprentice to journey level to lead hand or foreman, and from there into supervision, estimating or running your own work. Crew leadership and apprentice training are the lines that show you are ready for that step.
How long should this resume be?
One page. Employers in this field read quickly and often on a phone, and a second page rarely gets opened. Cut old short-term roles before you cut certifications or equipment experience.
Can I use this example as a template?
Use the structure and the way each achievement is phrased, but write your own content. The names and employers here are fictional, and a resume describing work you did not do will not survive an interview.
Build Your Welder Resume
Start from this layout, edit in a live preview with an ATS score as you type, and download as PDF, Word or image — free.
Use This Example — Free